The stainless steel Lean Duplex grout-in bracket JMK+ NFT is available with load levels of 3.5 and 7.0. The rated resistances are accordingly FRd = 4.7 kN or FRd = 9.5 kN. The condition and load-bearing capacity of the substrate must be checked in advance. The compressive strength of the existing masonry must be at least 2.1 N/mm2 and the wall thickness at least 240 mm. If the compressive strength is lower or walls are thinner, a special solution must be developed. The JMK+ NFT is available in cantilever lengths of 110 to 330 mm.
L
length
W
Angle
G
Weight per storage unit
Valid from February 1, 2025, updated version from 27/09/2025.
de
en
Brickwork support brackets, angled brackets, cavity wall anchors, parapet brick anchors and accessories
de
en
Anzahl:
We support you at every step of your construction project. With high-quality products including dimensioning software for optimum planning. If the standard product is not suitable for your project, our manufacturers will configure a product that is precisely tailored to your needs.
