BK 100 Floor duct, height = 100 mm

BK 100 floor ducts are made from sendzimir hot-dip galvanised steel and have sides 100 mm high and 100 to 600 mm wide. They are 3000, 1500 or 1000 mm long. To dissipate vertical live loads, one separating strip must be installed in the floor duct for widths ≥ 300 mm and two separating strips for widths ≥ 500 mm. A maximum compartment size of 200 mm must not be exceeded. BK 100 floor ducts have pre-stamped knock-out slugs on the sides spaced at 100 mm intervals for individual fastening of e.g. a potential equalisation terminal block.

data sheet

Tender text

You can find the appropriate tender text for this product on these portals:

Load requirements according to: DIN EN 50085

Request a callback now

Approvals and Certificates

Slip resistance and anti-slip properties according to DIN 51130 und
Load requirements according to DIN EN 50085
Electr. conductivity checked according to DIN EN 61537
EMC protection according to DIN CLC/TR 50659

Products

steel, continously hot galvanized/Sendzimir process

Products	H height	B width	L length	t material thickness	W Weight per storage unit
BK 1-100-10S	100 mm	100 mm	1000 mm	2,00 mm	4,880 kg
BK 1-100-15S	100 mm	150 mm	1000 mm	2,00 mm	5,647 kg
BK 1-100-20S	100 mm	200 mm	1000 mm	2,00 mm	6,316 kg
BK 1-100-30S	100 mm	300 mm	1000 mm	2,00 mm	7,874 kg
BK 1-100-40S	100 mm	400 mm	1000 mm	2,00 mm	9,418 kg
BK 1-100-50S	100 mm	500 mm	1000 mm	2,00 mm	10,962 kg
BK 1-100-60S	100 mm	600 mm	1000 mm	2,00 mm	12,506 kg
BK 1.5-100-10S	100 mm	100 mm	1500 mm	2,00 mm	7,325 kg
BK 1.5-100-15S	100 mm	150 mm	1500 mm	2,00 mm	8,477 kg
BK 1.5-100-20S	100 mm	200 mm	1500 mm	2,00 mm	9,574 kg
BK 1.5-100-30S	100 mm	300 mm	1500 mm	2,00 mm	11,809 kg
BK 1.5-100-40S	100 mm	400 mm	1500 mm	2,00 mm	14,126 kg
BK 1.5-100-50S	100 mm	500 mm	1500 mm	2,00 mm	16,442 kg
BK 1.5-100-60S	100 mm	600 mm	1500 mm	2,00 mm	18,759 kg
BK 100-10S	100 mm	100 mm	3000 mm	2,00 mm	14,661 kg
BK 100-15S	100 mm	150 mm	3000 mm	2,00 mm	16,864 kg
BK 100-20S	100 mm	200 mm	3000 mm	2,00 mm	18,946 kg
BK 100-30S	100 mm	300 mm	3000 mm	2,00 mm	23,617 kg
BK 100-40S	100 mm	400 mm	3000 mm	2,00 mm	28,250 kg
BK 100-50S	100 mm	500 mm	3000 mm	2,00 mm	32,883 kg
BK 100-60S	100 mm	600 mm	3000 mm	2,00 mm	37,516 kg

Detail and application images

Hover to zoom

Accessories

BKTE 100

Floor duct telescopic insert, height = 100 mm

BKDR

Floor duct cover with turning bolts

BKD-RHP

Floor duct cover with anti-slip embossing

BKDR-WZB AL

Floor duct cover made of aluminium diamond plate

BKV 100

Floor duct connector, height = 95 mm

BKRT 100

Floor duct separating strip, height = 100 mm

BKZ

Floor duct Z profile

BKEB 100

Floor duct end plate, height = 100 mm

BKHR

Floor duct holder, height = 108 mm

BKHC

Floor duct C frame, height = 90 mm

KHZ

Z profile

BKRKK 100

Floor duct reducer, height = 95 mm

BKRKS 100

Floor duct reducer, height = 95 mm

BKMT

Multitool for floor ducts

KSB

Edge protection strip

BKPA

Floor duct equipotential bonding terminal block

Downloads

DOK_PRO_TI_BK

Technical information

Floor ducts - Assembly instructions

Assembly instructions

Electrical conductivity (BK 100)

Certificate, according to DIN EN 61537 Pkt. 11.1

Whatever you plan.

We accompany you with expert advice, for every application. For day-to-day work in which much becomes easier and for increasing gratification in successful results.

contact@pohlcon.com

Call us

+49 30 68283-04