The floor duct bend BKBR 100 with integrated connectors and a radius of 95 mm allows the direction of cable routing to be changed horizontally by 90°. It is 100 mm high and 100 to 600 mm wide. It is made of sendzimir hot-dip galvanised steel. To dissipate vertical live loads, one separating strip must be installed in the floor duct for widths ≥ 300 mm and two separating strips for widths ≥ 500 mm. The bend is pushed into the floor ducts and then bolted in place.
data sheetTender text
You can find the appropriate tender text for this product on these portals:
Advantages
Advantages
- Creates horizontal changes of the cable routing direction by 90°.
- Cable-friendly guide
Products
steel, continously hot galvanized/Sendzimir process
| Products | H height | B width | t material thickness | R radius | W Weight per storage unit | incl. show all inclusive accessoires | bookmark | ||
|---|---|---|---|---|---|---|---|---|---|
| BKBR 100-10S | 100 mm | 100 mm | 2,00 mm | 95 mm | horizontal | 90° | 3,500 kg | ||
| BKBR 100-15S | 100 mm | 150 mm | 2,00 mm | 95 mm | horizontal | 90° | 4,130 kg | ||
| BKBR 100-20S | 100 mm | 200 mm | 2,00 mm | 95 mm | horizontal | 90° | 4,870 kg | ||
| BKBR 100-30S | 100 mm | 300 mm | 2,00 mm | 95 mm | horizontal | 90° | 6,530 kg | ||
| BKBR 100-40S | 100 mm | 400 mm | 2,00 mm | 95 mm | horizontal | 90° | 8,510 kg | ||
| BKBR 100-50S | 100 mm | 500 mm | 2,00 mm | 95 mm | horizontal | 90° | 10,800 kg | ||
| BKBR 100-60S | 100 mm | 600 mm | 2,00 mm | 95 mm | horizontal | 90° | 13,410 kg |
