The floor duct bend BKBG 100 with integrated connectors and mitre cut allows the direction of cable routing to be changed horizontally by 90°. It is 100 mm high and 100 to 600 mm wide. It is made of sendzimir hot-dip galvanised steel. To dissipate vertical live loads, one separating strip must be installed in the floor duct for widths ≥ 300 mm and two separating strips for widths ≥ 500 mm. The bend is pushed into the floor ducts and then bolted in place.
data sheetTender text
You can find the appropriate tender text for this product on these portals:
Advantages
Advantages
- Creates horizontal changes of the cable routing direction by 90°.
- Cable-friendly guide
Products
steel, continously hot galvanized/Sendzimir process
| Products | H height | B width | t material thickness | W Weight per storage unit | incl. show all inclusive accessoires | bookmark | ||
|---|---|---|---|---|---|---|---|---|
| BKBG 100-10S | 100 mm | 100 mm | 2,00 mm | horizontal | 90° | 4,874 kg | ||
| BKBG 100-15S | 100 mm | 150 mm | 2,00 mm | horizontal | 90° | 5,594 kg | ||
| BKBG 100-20S | 100 mm | 200 mm | 2,00 mm | horizontal | 90° | 6,414 kg | ||
| BKBG 100-30S | 100 mm | 300 mm | 2,00 mm | horizontal | 90° | 8,074 kg | ||
| BKBG 100-40S | 100 mm | 400 mm | 2,00 mm | horizontal | 90° | 10,434 kg | ||
| BKBG 100-50S | 100 mm | 500 mm | 2,00 mm | horizontal | 90° | 12,974 kg | ||
| BKBG 100-60S | 100 mm | 600 mm | 2,00 mm | horizontal | 90° | 15,674 kg |
