BK 110 Floor duct, height = 110 mm

BK 110 floor ducts are made from sendzimir hot-dip galvanised steel and have sides 110 mm high and 100 to 600 mm wide. They are 3000, 1500 or 1000 mm long. To dissipate vertical live loads, one separating strip must be installed in the floor duct for widths ≥ 300 mm and two separating strips for widths ≥ 500 mm. A maximum compartment size of 200 mm must not be exceeded. BK 110 floor ducts have pre-stamped knock-out slugs on the sides spaced at 100 mm intervals for individual fastening of e.g. a potential equalisation terminal block.

data sheet

Tender text

You can find the appropriate tender text for this product on these portals:

Load requirements according to: DIN EN 50085

Request a callback now

Approvals and Certificates

Slip resistance and anti-slip properties according to DIN 51130 und
Load requirements according to DIN EN 50085
Electr. conductivity checked according to DIN EN 61537
EMC protection according to DIN CLC/TR 50659

Products

steel, continously hot galvanized/Sendzimir process

Products	H height	B width	L length	t material thickness	W Weight per storage unit
BK 1-110-10S	110 mm	100 mm	1000 mm	2,00 mm	5,194 kg
BK 1-110-15S	110 mm	150 mm	1000 mm	2,00 mm	5,961 kg
BK 1-110-20S	110 mm	200 mm	1000 mm	2,00 mm	6,630 kg
BK 1-110-30S	110 mm	300 mm	1000 mm	2,00 mm	8,188 kg
BK 1-110-40S	110 mm	400 mm	1000 mm	2,00 mm	9,732 kg
BK 1-110-50S	110 mm	500 mm	1000 mm	2,00 mm	11,276 kg
BK 1-110-60S	110 mm	600 mm	1000 mm	2,00 mm	12,820 kg
BK 1.5-110-10S	110 mm	100 mm	1500 mm	2,00 mm	7,796 kg
BK 1.5-110-15S	110 mm	150 mm	1500 mm	2,00 mm	8,947 kg
BK 1.5-110-20S	110 mm	200 mm	1500 mm	2,00 mm	9,945 kg
BK 1.5-110-30S	110 mm	300 mm	1500 mm	2,00 mm	12,280 kg
BK 1.5-110-40S	110 mm	400 mm	1500 mm	2,00 mm	14,597 kg
BK 1.5-110-50S	110 mm	500 mm	1500 mm	2,00 mm	16,913 kg
BK 1.5-110-60S	110 mm	600 mm	1500 mm	2,00 mm	19,230 kg
BK 110-10S	110 mm	100 mm	3000 mm	2,00 mm	15,603 kg
BK 110-15S	110 mm	150 mm	3000 mm	2,00 mm	17,609 kg
BK 110-20S	110 mm	200 mm	3000 mm	2,00 mm	19,888 kg
BK 110-30S	110 mm	300 mm	3000 mm	2,00 mm	24,559 kg
BK 110-40S	110 mm	400 mm	3000 mm	2,00 mm	29,192 kg
BK 110-50S	110 mm	500 mm	3000 mm	2,00 mm	33,825 kg
BK 110-60S	110 mm	600 mm	3000 mm	2,00 mm	38,458 kg

Detail and application images

Hover to zoom

Accessories

BKTE 110

Floor duct telescopic insert, height = 110 mm

BKDR

Floor duct cover with turning bolts

BKD-RHP

Floor duct cover with anti-slip embossing

BKDR-WZB AL

Floor duct cover made of aluminium diamond plate

BKV 110

Floor duct connector, height = 95 mm

BKRT 110

Floor duct separating strip, height = 110 mm

BKZ

Floor duct Z profile

BKEB 110

Floor duct end plate, height = 110 mm

BKHR

Floor duct holder, height = 108 mm

BKHC

Floor duct C frame, height = 90 mm

KHZ

Z profile

BKRKK 110

Floor duct reducer, height = 105 mm

BKRKS 110

Floor duct reducer, height = 105 mm

BKMT

Multitool for floor ducts

KSB

Edge protection strip

BKPA

Floor duct equipotential bonding terminal block

Downloads

DOK_PRO_TI_BK

Technical information

Floor ducts - Assembly instructions

Assembly instructions

Electrical conductivity (BK 100)

Certificate, according to DIN EN 61537 Pkt. 11.1

Whatever you plan.

We accompany you with expert advice, for every application. For day-to-day work in which much becomes easier and for increasing gratification in successful results.

contact@pohlcon.com

Call us

+49 30 68283-04