Cables and lines with different functions or voltages can be routed separately from one another in the same vertical ladder or cable ladder using the separating strip LGTR 60. The separating strip is

The welded clamp fastener KLUGW is used to fasten mesh cable trays and cable trays to horizontal steel beams. The maximum nominal load is between 0.4 and 1.1 kN and may need to be treated or reduced

The profiled metal sheet channel JTB-AR is approved by the building supervisory authority (technical approval number: Z-21.4-161. It is made of hot-dip galvanized steel (fv) or stainless steel (A4).

The profiled metal sheet channel JTB-LA has the general building authority approval (abZ) Z-21.4-2148 and is made of hot-dip galvanized steel (fv).With a stock length of 3000 mm, the channel is

To create vertical changes of direction, LGVV 100 vertical connectors are pushed onto the rails of the cable ladder and bolted in place according to the installation instructions. The connectors can

The mounting channel KHAL 41 consists of a C+ profile 41 x 41 mm with continuous perforation and a slot width of 22 mm made from material 1.5 mm thick. We provide components in various materials and

The mounting channel KHA 21 consists of a C+ profile 41 x 21 mm with continuous perforation and a slot width of 22 mm made from material 2.5 mm thick. We provide components in various materials and

The channel connector corner AVE can be used to connect mounting channels together as branches. We provide components in various materials and surface finishes to ensure that the corrosion

The wide-span attachment corner WPEA 120 allows the direction of cable routing to be changed horizontally by 90° and is suitable for wide-span cable trays with side rails 120 mm high. It is combined