The bracket holder KDAG 41 with welded-on head plate consists of a C+ profile 41 x 41 mm with continuous perforation and a slot 22 mm wide. It is made of hot-dip galvanised steel and is available in

The profile rail A 41 is unperforated and consists of a C+ profile 41 x 41 mm with a slot width of 22 mm (material thickness = 2.5 mm). We provide components in various materials and surface finishes

The strut bracket KT is attached to the KDI or KHI bracket holder and is intended for loads up to 2.1 kN. Various surfaces ensure that the corrosion requirements of a wide variety of applications are

The bracket KTS is attached to bracket holder KDI or KHI and is designed for maximum loads of up to 7 kN, depending on the bracket length. They are made of hot-dip galvanised steel.

The bracket holder KDI with welded-on top plate (material thickness t) consists of an I profile 80 x 42 mm with continuous slots in the rail. Various surfaces ensure that the corrosion requirements

The anti-pullout bracket STDES is mounted on the STDE impact protection in accordance with the installation instructions. It prevents the impact protection from being unintentionally removed from the

The rungs STIS are installed while fitting the vertical ladder and bolted to the side rail. They are suitable for ST 81 vertical ladders. The rungs are 200 to 1200 wide mm corresponding to the

The rungs STISD are installed while fitting the vertical ladder and bolted to the side rail. They are suitable for ST 82 vertical ladders for double-sided cable assignment. They are 200 to 1200 mm

The head plate BGIQ with a plate turned at right angles to the rail is used for mounting KHI bracket holders on ceilings. It is bolted to the bracket holder and dowelled to the ceiling. The ST 81 and

The corner angle BL 7 is used to fasten KHI bracket holders to the wall. The bracket can also be used to attach ST 81 and ST 82 vertical ladders to the ceiling, floor and wall. The angle is bolted to