UBSFMAB is a mounting kit made of hot-dip galvanised sheet steel for creating 90° bends within the screed-flush duct system UBSF. The pre-assembled covering joint profiles (covering level: 0 and 3 mm) are included in the shipment. The necessary crossbeams and levelling base must be ordered separately. 2 levelling base per crossbeam are required for profiles with a width of up to 300 mm. 3 levelling base per crossbeam are required for profiles with a width of 400 mm and more. The minimum installation height of the mounting kit varies between 60 and 150 mm, depending on the product. The component complies with DIN EN 50085 - the European standard for electrical installation duct systems, and is tested and certified by VDE.
data sheetTender text
You can find the appropriate tender text for this product on these portals:
Load requirements according to: DIN EN 50085 
Products
| Products | Hmin minimum installation height | N levelling range | W Weight per storage unit | bookmark |
|---|---|---|---|---|
| UBSFMAB 60S | 60 mm | 20 mm | 0,906 kg | |
| UBSFMAB 75S | 75 mm | 30 mm | 1,050 kg | |
| UBSFMAB 100S | 100 mm | 55 mm | 1,319 kg | |
| UBSFMAB 150S | 150 mm | 105 mm | 1,829 kg |
