UVB 3 components are three-section vertical bends with two separating strips. They are used to install screed-covered duct systems. They are manufactured as a closed rectangular profile with a 90° angle and are mounted on the raw slab with the multi-channel duct sections. The bends are made of sendzimir hot-dip galvanised sheet steel in accordance with DIN EN 10346. The upper and lower parts are permanently connected together at the factory. UVB 3 components have a VDE/TÜV approval according to DIN EN 50085.
data sheetTender text
You can find the appropriate tender text for this product on these portals:
Load requirements according to: DIN EN 50085 
Approvals and Certificates
Approvals and Certificates
- VDE/TÜV approval according to DIN EN 50085
Products
steel, continously hot galvanized/Sendzimir process
| Products | H height | B width | L length | W Weight per storage unit | bookmark | ||||
|---|---|---|---|---|---|---|---|---|---|
| UVB 3-28-250S | 29 mm | 246 mm | 132 mm | 0 | 1 | vertical | 90° | 0,939 kg | |
| UVB 3-28-350S | 29 mm | 346 mm | 132 mm | 0 | 1 | vertical | 90° | 1,204 kg | |
| UVB 3-38-250S | 39 mm | 246 mm | 132 mm | 0 | 1 | vertical | 90° | 0,955 kg | |
| UVB 3-38-350S | 39 mm | 346 mm | 132 mm | 0 | 1 | vertical | 90° | 1,207 kg | |
| UVB 3-48-250S | 49 mm | 246 mm | 132 mm | 0 | 1 | vertical | 90° | 0,979 kg | |
| UVB 3-48-350S | 49 mm | 346 mm | 132 mm | 0 | 1 | vertical | 90° | 1,218 kg |
