The protective caps SU 50/36 are suitable for STU 50 vertical ladders and are pushed onto the vertical ladder rails depending on the circumstances. They are made of polyethylene and are 50 mm wide

Mesh cable trays G can be mounted horizontally tilted on the longitudinal wires of the mesh cable tray at a distance from the wall using the spacer bracket GBH 50, whereby two spacer brackets

The protective caps SU 50/22 are suitable for STU 50-3E vertical ladders and are pushed onto the vertical ladder rails depending on the circumstances. They are made of polyethylene and are 50 mm wide

STU 50 vertical ladders consist of perforated side rails with U profiles and rungs made of 40x22 mm profile rails. They are designed for a maximum load of up to 2.00 kN, are 210 to 800 mm wide and

Mesh cable trays G and GI can be mounted vertically on the longitudinal wires of the mesh cable tray base at a short distance from the wall using the spacer bracket GBHK 50. For larger mesh cable

JGM G hammer-head locking plates are threaded plates that are inserted at any point of the corresponding anchor or mounting channel. The threaded hole is centred by turning it 90° after insertion.

PENTAFLEX® OBS G-S Floor floor panel elements for smooth joints (according to EC 2) consist of PENTAFLEX KB® joint sheets with wings made of galvanised sheet steel. They come in lengths of 2500 mm as

STU 50-3E stainless steel vertical ladders consist of perforated side rails with U profiles and rungs made of profile rails 39.5x22 mm. They are designed for a maximum load of up to 2.00 kN, are 210