The KTW-R 10 cable support tray with riveted back rail is used for routing cables on walls in a space-saving manner. It is available in a width of 118 mm and for cable diameters of 100 mm. It can be

The KPR 40 support rail for light fittings is used to suspend linear or strip lights. It is available in lengths of 3000 and 6000 mm, is 40 mm high and 40 mm wide. The rail is made of sendzimir

The KPR connector KPV is used to connect two KPR support rails for light fittings. It is pushed into the first channel. The connecting rail is then pushed onto the connector. It is 300 mm long and is

The mounting bracket KPB is used to suspend the light rail system along with a tube with an armoured thread (PG) 9. The bracket is attached to the ceiling using dowels. It is made of hot-dip

The holding clip KPH is pushed onto the KPR profile and can be freely positioned there. The suspension element is mounted on the retaining claw. The distance between supports must not exceed 6000 mm.

The strut bracket KA 41 is attached to bracket holder KDAG 41 or KHA 41/KHAL 41 and is intended for loads up to 4.3 kN. The system is ideal for suspending mesh cable trays, cable trays and ladders up

The support bracket KC with C-profile is used to suspend cable trays and mesh cable trays in widths from 100 to 400 mm or for direct mounting on walls or ceilings. This article is available in

The wall bracket KWW serves as a crossbeam either directly on the building structure and fixed using dowels or on two bracket supports (pendulum suspension). They are made of hot-dip galvanised

The wall bracket KWSS with welded-on back plate is intended for loads up to 10 kN. It is ideal for fastening wide-span trays and is made from hot-dip galvanised steel. FD/P: factor for calculating