Search | PohlCon GmbH

Wide-span cable ladder connector, height = 200 mm

/en/products/cable-management-systems/wide-span-systems/wide-span-cable-tray-accessories/wlv-200

WLV 200 wide span connectors can be used to connect 200 mm wide-span cable trays together. One side of the connector is mounted as a floating bearing to allow for thermal expansion. The required

WPVH 120

Wide-span cable tray connector, horizontal, height = 105 mm

/en/products/cable-management-systems/wide-span-systems/wide-span-cable-tray-accessories/wpvh-120

WPVH 120 wide-span connectors can be used to connect wide-span cable trays or ladders together and to create horizontal changes in direction. If the direction changes by > 30°, the cable trays

WPVH 150

Wide-span cable tray connector, horizontal, height = 135 mm

/en/products/cable-management-systems/wide-span-systems/wide-span-cable-tray-accessories/wpvh-150

WPVH 150 wide-span connectors can be used to connect wide-span cable trays or ladders together and to create horizontal changes in direction. If the direction changes by > 30°, the cable trays

WLVH 200

Wide-span cable ladder connector, horizontal, height = 200 mm

/en/products/cable-management-systems/wide-span-systems/wide-span-cable-tray-accessories/wlvh-200

WLVH 200 wide span connectors can be used to connect 200 mm wide-span cable trays together and to create horizontal changes in direction. If the direction changes by > 30°, the cable trays must

RVB 85

Cable tray vertical bend, height = 85 mm

/en/products/cable-management-systems/cable-trays/cable-tray-formed-parts/rvb-85

The cable tray vertical bend RVB 85 allows the direction of cable routing to be changed flexibly and vertically. It is inserted into the cable tray along with a REB cable tray end plate and bolted to

Back plate for wall bracket KW/KWF

/en/products/cable-management-systems/cable-support-system-fastening-accessories/clamping-assembly/rp

The back plate RP is suitable for brackets KWF or KW, which are fastened to steel profiles by means of horizontal profile rails KHA 8 or KHA 41. The back plate between bracket and profile rail

KFSC

Cable block, C-profile with protection mat

/en/products/cable-management-systems/cable-support-system-fastening-accessories/cable-blocks/kfsc

Cable block KFSC; roof tile with a batch/hot-dip galvanized C-channel (corresponds to A 8 profile rail) and protection mat. For laying cable trays, mesh cable trays, pipes, channels and cables using

KLUS

Clamp fastening set

/en/products/cable-management-systems/cable-support-system-fastening-accessories/clamping-assembly/klus

The clamp fastening set KLUS consists of two plates with screw accessories and is used for angular fastening of cable ladders and cable trays on brackets. We provide components in various materials

A 4

48x26 mm profile rail, unperforated

/en/products/cable-management-systems/support-systems/c-profile-rails/a-4

The profile rail A 4 is unperforated and consists of a C+ profile 48 x 26 mm with a slot width of 22 mm (material thickness = 2.5 mm). We provide components in various materials and surface finishes

A 7

39.5x22 mm profile rail, unperforated

/en/products/cable-management-systems/support-systems/c-profile-rails/a-7

The profile rail A 7 is unperforated and consists of a C+ profile 39.5 x 22 mm with a slot width of 18 mm (material thickness = 1.5 mm). We provide components in various materials and surface

Whatever you plan.

We accompany you with expert advice, for every application. For day-to-day work in which much becomes easier and for increasing gratification in successful results.

contact@pohlcon.com

Call us

+49 30 68283-04