The anchor channel JTA RF W 40/22 is made of hot-dip galvanised steel (fv) or stainless steel (A4). The JTA RF W 40/22 has reinforcing bars as anchors made of reinforcing steel. It is available in

The anchor channel JXA W 64/44 is approved throughout Europe by ETA-09/0338 and almost worldwide by ICC-ES ESR‐2854. It also has environmental product declaration EPD-JDL-20200260-IBB1-DE. It is made

The anchor channel JXA W 53/34 is approved throughout Europe by ETA-09/0338 and almost worldwide by ICC-ES ESR‐2854. It also has environmental product declaration EPD-JDL-20200260-IBB1-DE. It is made

The anchor channel JXA W 38/23 is approved throughout Europe by ETA-09/0338 and almost worldwide by ICC-ES ESR‐2854. It also has environmental product declaration EPD-JDL-20200260-IBB1-DE. It is made

The KHZ floor duct bracket is used to elevate the floor duct if, for example, media lines are to be installed below the floor duct system. It is advisable to space the supports 1.5 m apart Make sure

The mounting channel KHA 41 consists of a C+ profile 41 x 41 mm with continuous perforation and a slot width of 22 mm made from material 2.5 mm thick. It is made of hot-dip galvanised steel. KHA 41

The BKHZSV floor duct side panelling is used when the floor trunking is elevated using BKHZ floor trunking brackets and fastened using BS 5.5x19 self-drilling screws. The side panelling protects

The floor duct support BKHZ is used to elevate the floor duct if, for example, media lines are to be installed underneath the floor trunking system. A maximum support spacing of 900 mm must be

The BKHRU floor duct bracket support is used to support the BKHR floor duct bracket from a length of 400 mm. The support does not have to be bolted to the floor. There is no need to install dowels.

The BKGLDR floor duct cover with a mitre cut on the left is placed on top of the BKGL floor duct branch and protects cables and supply lines from flying sparks and other mechanical effects. It is 100