The floor duct branch BKGR 110 with a mitre cut on the right and integrated connectors allows the direction of cable routing to be changed horizontally in the form of a 45° branch. It is 110 mm high and 100 to 600 mm wide. It is made of sendzimir hot-dip galvanised steel. To dissipate vertical live loads, one separating strip must be installed in the floor duct for widths ≥ 300 mm and two separating strips for widths ≥ 500 mm. The side rail of the main floor duct is cut out accordingly at the point where the connecting floor duct will branch off. The BKGR branch is positioned and bolted in place at this point. The branching floor duct can then be pushed in.
data sheetTender text
You can find the appropriate tender text for this product on these portals:
Advantages
Advantages
- Changes the cable routing direction horizontally in the form of a branch of 45°.
- Cable-friendly guide
Products
| Products | H height | B width | t material thickness | W Weight per storage unit | incl. show all inclusive accessoires | bookmark | |
|---|---|---|---|---|---|---|---|
| BKGR 110-10S | 110 mm | 100 mm | 2,00 mm | 45° | 2,872 kg | ||
| BKGR 110-15S | 110 mm | 150 mm | 2,00 mm | 45° | 3,242 kg | ||
| BKGR 110-20S | 110 mm | 200 mm | 2,00 mm | 45° | 3,652 kg | ||
| BKGR 110-30S | 110 mm | 300 mm | 2,00 mm | 45° | 4,592 kg | ||
| BKGR 110-40S | 110 mm | 400 mm | 2,00 mm | 45° | 5,702 kg | ||
| BKGR 110-50S | 110 mm | 500 mm | 2,00 mm | 45° | 6,982 kg | ||
| BKGR 110-60S | 110 mm | 600 mm | 2,00 mm | 45° | 8,352 kg |
