The floor duct branch BKGR 100 with a mitre cut on the right and integrated connectors allows the direction of cable routing to be changed horizontally in the form of a 45° branch. It is 100 mm high and 100 to 600 mm wide. It is made of sendzimir hot-dip galvanised steel. To dissipate vertical live loads, one separating strip must be installed in the floor duct for widths ≥ 300 mm and two separating strips for widths ≥ 500 mm. The side rail of the main floor duct is cut out accordingly at the point where the connecting floor duct will branch off. The BKGR branch is positioned and bolted in place at this point. The branching floor duct can then be pushed in.
data sheetTender text
You can find the appropriate tender text for this product on these portals:
Advantages
Advantages
- Changes the cable routing direction horizontally in the form of a branch of 45°.
- Cable-friendly guide
Products
| Products | H height | B width | t material thickness | W Weight per storage unit | incl. show all inclusive accessoires | bookmark | |
|---|---|---|---|---|---|---|---|
| BKGR 100-10S | 100 mm | 100 mm | 2,00 mm | 45° | 2,782 kg | ||
| BKGR 100-15S | 100 mm | 150 mm | 2,00 mm | 45° | 3,142 kg | ||
| BKGR 100-20S | 100 mm | 200 mm | 2,00 mm | 45° | 3,552 kg | ||
| BKGR 100-30S | 100 mm | 300 mm | 2,00 mm | 45° | 4,382 kg | ||
| BKGR 100-40S | 100 mm | 400 mm | 2,00 mm | 45° | 5,562 kg | ||
| BKGR 100-50S | 100 mm | 500 mm | 2,00 mm | 45° | 6,832 kg | ||
| BKGR 100-60S | 100 mm | 600 mm | 2,00 mm | 45° | 8,182 kg |
