The UBDHB350 3V components are false floor sockets that are installed as pull boxes and built-in boxes on screed-covered underfloor ducts. They have a mounting hole to accommodate a formwork body, which is replaced by a square plastic or stainless steel installation unit during final assembly. The supplied earthing clamps are used for equipotential bonding. The floor sockets with side walls that can be bent open on all sides are made of sendzimir hot-dip galvanised sheet steel in accordance with DIN EN 10346 and have VDE/TÜV approval in accordance with DIN EN 50085.
data sheetTender text
You can find the appropriate tender text for this product on these portals:
Load requirements according to: DIN EN 50085 
Approvals and Certificates
Approvals and Certificates
- VDE/TÜV approval according to DIN EN 50085
Products
| Products | H height | Hmin minimum installation height | B1 width | B2 width | L1 length 1 | L2 length 2 | E fitting dimension | mounting box maximum number of installable device casings | weight | incl. show all inclusive accessoires | bookmark | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| UBDHB350 28-259V | 31 mm | 67 mm | 410 mm | 450 mm | 410 mm | 450 mm | 262 x 262 mm | 3 | 0 | 1 | 3,399 kg | ||
| UBDHB350 38-259V | 41 mm | 77 mm | 410 mm | 450 mm | 410 mm | 450 mm | 262 x 262 mm | 3 | 0 | 1 | 3,491 kg | ||
| UBDHB350 48-259V | 51 mm | 87 mm | 410 mm | 450 mm | 410 mm | 450 mm | 262 x 262 mm | 3 | 0 | 1 | 3,587 kg |
