UEBDM VP WD construction elements are square tube cover units. They consist of a cartridge mounting frame with a tube outlet cartridge, a bolted tube mounting kit and a rubber seal. They are bolted onto levelling units and can be equipped with max. 3 mounting boxes with installation devices. The are used in floor sockets in wet-cleaned rooms with office traffic loads. The units are made of stainless steel V2A. They have a flat, blasted surface with a slip resistance class of R9, an IP protection class of IP 54 in an unused condition, an IP protection class of IP 22 when used and a maximum load capacity of 4 kN. They have a min. installation height of 85 mm, are 258 mm wide, 19 mm high and have installation dimensions of 261 x 261 mm.
data sheetTender text
You can find the appropriate tender text for this product on these portals:
wet maintained 
Load requirements according to: DIN EN 50085 
Approvals and Certificates
Approvals and Certificates
- VDE/TÜV approval according to DIN EN 50085
- With inspection stamp dia. 13/130 mm: 4/10 kN
Products
| Products | H height | Hmin minimum installation height | B width | E fitting dimension | Pmax maximum load | IPg IP protection level in used condition | IPn IP protection level in unused condition | T Depth of flooring recess | mounting box maximum number of installable device casings | W Weight per storage unit | incl. show all inclusive accessoires | bookmark |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| UEBDM 15-VP-WD | 19 mm | 85 mm | 258 mm | 261 x 261 mm | 4,00 kN | IP-22 | IP-54 | 0 mm | 3 | 4,612 kg |
