UEBD2 V E components are dummy covers with abutting edges. They consist of a height-adjustable installation unit, a rubber seal and a dummy cartridge for holding a maximum of two mounting boxes. The units are suitable for installation in UBDHB floor sockets and raised or false floor openings in dry-cleaned and wet-cleaned rooms with office traffic loads. They are made of stainless steel V2A. They have an IP protection level of IP 30 in an unused condition, a maximum load capacity of 1.5 kN, an adjustment range of 45 mm, an installation dimension of 261 x 186 mm and a minimum installation height of 90 or 100 mm.
data sheetTender text
You can find the appropriate tender text for this product on these portals:
Floor maintenance: Moist 
Load requirements according to: DIN EN 50085 
Approvals and Certificates
Approvals and Certificates
- VDE/TÜV approval according to DIN EN 50085
- With inspection stamp dia. 13 mm: 1.5 kN
Products
Stainless steel, according to ASTM 304 / BS 304 S 3
| Products | L length | B width | H height | Hmin minimum installation height | N levelling range | Pmax maximum load | E fitting dimension | IPn IP protection level in unused condition | T Depth of flooring recess | W Weight per storage unit | bookmark |
|---|---|---|---|---|---|---|---|---|---|---|---|
| UEBD2 15-V E | 258 mm | 185 mm | 19 mm | 90 mm | 45 mm | 1,50 kN | 261 x 186 mm | IP 30 | 12,5 mm | 2,217 kg | |
| UEBD2 25-V E | 258 mm | 185 mm | 29 mm | 100 mm | 45 mm | 1,50 kN | 261 x 186 mm | IP 30 | 22,5 mm | 2,485 kg |
