The floor duct bend BKBR 110 with integrated connectors and a radius of 95 mm allows the direction of cable routing to be changed horizontally by 90°. It is 110 mm high and 100 to 600 mm wide. It is made of sendzimir hot-dip galvanised steel. To dissipate vertical live loads, one separating strip must be installed in the floor duct for widths ≥ 300 mm and two separating strips for widths ≥ 500 mm. The bend is pushed into the floor ducts and then bolted in place.
data sheetTender text
You can find the appropriate tender text for this product on these portals:
Advantages
Advantages
- Creates horizontal changes of the cable routing direction by 90°.
- Cable-friendly guide
Products
steel, continously hot galvanized/Sendzimir process
| Products | H height | B width | t material thickness | R radius | W Weight per storage unit | incl. show all inclusive accessoires | bookmark | ||
|---|---|---|---|---|---|---|---|---|---|
| BKBR 110-10S | 110 mm | 100 mm | 2,00 mm | 95 mm | horizontal | 90° | 3,870 kg | ||
| BKBR 110-15S | 110 mm | 150 mm | 2,00 mm | 95 mm | horizontal | 90° | 4,520 kg | ||
| BKBR 110-20S | 110 mm | 200 mm | 2,00 mm | 95 mm | horizontal | 90° | 5,250 kg | ||
| BKBR 110-30S | 110 mm | 300 mm | 2,00 mm | 95 mm | horizontal | 90° | 6,940 kg | ||
| BKBR 110-40S | 110 mm | 400 mm | 2,00 mm | 95 mm | horizontal | 90° | 8,960 kg | ||
| BKBR 110-50S | 110 mm | 500 mm | 2,00 mm | 95 mm | horizontal | 90° | 11,280 kg | ||
| BKBR 110-60S | 110 mm | 600 mm | 2,00 mm | 95 mm | horizontal | 90° | 13,920 kg |
