The BKAA 100 floor duct attachment branch with integrated connectors allows the direction of cable routing to be changed horizontally by 90°. It is 100 mm high and 100 to 600 mm wide. It is made of sendzimir hot-dip galvanised steel. To dissipate vertical live loads, one separating strip must be installed in the floor duct for widths ≥ 300 mm and two separating strips for widths ≥ 500 mm. The side rail of the main floor duct is cut out accordingly at the point where the connecting floor duct will branch off. The BKAA attachment branch is positioned and bolted in place at this point. The branching floor duct can then be pushed in.
data sheetTender text
You can find the appropriate tender text for this product on these portals:
Advantages
Advantages
- Changes the cable routing direction horizontally in the form of a branch of 90°.
- Cable-friendly guide
Products
steel, continously hot galvanized/Sendzimir process
| Products | H height | B width | t material thickness | weight | incl. show all inclusive accessoires | bookmark | |
|---|---|---|---|---|---|---|---|
| BKAA 100-10S | 100 mm | 100 mm | 2,00 mm | 90 ° | 1,316 kg | ||
| BKAA 100-15S | 100 mm | 150 mm | 2,00 mm | 90 ° | 1,456 kg | ||
| BKAA 100-20S | 100 mm | 200 mm | 2,00 mm | 90 ° | 1,536 kg | ||
| BKAA 100-30S | 100 mm | 300 mm | 2,00 mm | 90 ° | 1,756 kg | ||
| BKAA 100-40S | 100 mm | 400 mm | 2,00 mm | 90 ° | 1,966 kg | ||
| BKAA 100-50S | 100 mm | 500 mm | 2,00 mm | 90 ° | 2,186 kg | ||
| BKAA 100-60S | 100 mm | 600 mm | 2,00 mm | 90 ° | 2,406 kg |
