The double fixing clamp SRS-W can be used to attach e.g. lights to the protective tube. It can also be used to attach the protective tube itself to masonry, for example. The mounting clamp is

The welded clamp fastener KLUGS is used to fasten mesh cable trays and cable trays on vertical steel beams. The tightening torque to be used is 10 Nm. The clamping range extends from 5 - 33 mm. We

The BS self-drilling screw with drill point is used to connect steel sheets without pre-drilling holes. It is made of galvanised steel. BS 4.2x13 with drive size T20, usable thread length 4.3

The stainless steel Lean Duplex grout-in bracket JMK+ FAR is available with load levels of 3.5 and 7.0. The rated resistances are accordingly FRd = 4.7 kN or FRd = 9.5 kN. The condition and

Signs, distributor boxes or measurement technology can be attached to assembly plate SRMP-C. The assembly plate itself is attached to the protective tube system using two worm drive clamps. The

The KLTSU can be used to mount KHA 7, KHA 8 and KHB 7 rungs in flange supports.

The head plate BGUD is used for mounting bracket holders KHU 40, 57 and 60 on ceilings. It is bolted to the profile and dowelled to the ceiling. Inclined bracing in the range of +/- 30° can be

The profile rail KHA 2 consists of a C+ profile 50 x 31 mm with continuous perforation and a slot width of 22 mm (material thickness = 3.25 mm). It is made of hot-dip galvanised steel and is

UDEP LEX components are installation boards from the underfloor system range. The boards are bolted into data device carriers and are used to accommodate up to 2 p D-Sub 9 connection sockets made by

The UGD R components are round rubber seals. These accessories from the underfloor systems range can be placed or bonded onto the frames of various cartridge units. They are used to reliably decouple