The channel joint connector AVLK is used to connect three mounting channels (A 41, KHA 41, KHAL 41), two continuous channels and one in a T-joint. The T-joint is perpendicular to both continuous

The channel connector AVLWB is used to rigidly connect two intersecting mounting channels. It has Ø 13 mm fixing holes and is made of hot-dip galvanised steel. Fastening accessories must be ordered

The channel joint connector AVLWBF is used to rigidly connect two mounting channels (KHA 41, KHAL 41) in a T-joint. It has Ø 13 mm fixing holes and is made of hot-dip galvanised steel. Fastening

The channel joint connector AVLWBL is used to rigidly connect two mounting channels (A 41, KHA 41, KHAL 41) in a T-joint. It has Ø 13 mm fixing holes and is made of hot-dip galvanised steel.

The pipe clamp AVRS is used to fasten pipes in C mounting channels (A 41, KHA 41, KHAL 41) with 22 mm slot width. It has a fastening hole with Ø 14 mm and is made of hot-dip galvanised steel.

The wide-span attachment corner WPEA 120 allows the direction of cable routing to be changed horizontally by 90° and is suitable for wide-span cable trays with side rails 120 mm high. It is combined

The BKDU 100 floor duct cover support provides additional support for the covers. It is placed in the floor duct with the open end facing downwards. The cover support is 200 to 600 mm wide

The BKDU 110 floor duct cover support provides additional support for the covers. It is placed in the floor duct with the open end facing downwards. The cover support is 200 to 600 mm wide

The head plate BGA 41/2 is used for mounting two bracket holders KHA 41 / KHAL 41 or the profile rail KHA 82 on ceilings. It is bolted to the profile rails and dowelled to the ceiling. We provide

The beam clamp set SKL M can be combined with mounting channel KHA 2. It is used to fix KDU 60 bracket supports to steel beams. The set can be loaded up to 10 kN. The clamping range extends from 5 -