The beam clamp set SKL A can be combined with mounting channels A 41 or KHA/KHAL 41. It is used to fix KDU and KDI bracket supports to steel beams. The set can be loaded up to 10 kN. The clamping

The mounting channel JM K 53/34 has environmental product declaration EPD-JDL-20200260-IBB1-DE and is made of hot-dip galvanised steel (fv), stainless steel (A4) or rolled plain steel (wb). It has a

The BKHC floor duct bracket is used to elevate the floor duct if, for example, media lines are to be installed below the floor duct system. It is advisable to space the supports 1.5 m apart The C

KDIA-G is an adapter for KDI bracket holders that reduces the loads on the dowels or distributes the load to 4 dowels in compliance with the approval. It is inserted into the bracket holder from

The bracket holder KHI with welded-on top plate (material thickness t) consists of an I profile 80 x 42 mm with continuous slots in the rail. Various surfaces ensure that the corrosion requirements

The wide-span floor duct riser WPLS 120 with integrated connectors allows the direction of cable routing to be changed vertically by 90° upwards. It is suitable for wide-span cable ladders with rails

The MKDPOT mounting clamp with pointed stud screw is used for clamping to coated steel beams where potential equalization must be guaranteed. The maximum load is 1.5 kN. The clamping range extends

The mounting channel JML K 28/28 has environmental product declaration EPD-JDL-20200260-IBB1-DE and is made of hot-dip galvanised steel (fv), stainless steel (A4) or rolled plain steel (wb). It has a

The SKLT ship cable ladder separating strip allows cables and lines with different functions or voltages to be routed separately in the same ship cable ladder. The divider is bolted to the ladder

The profile rail A 8 is unperforated and consists of a C+ profile 40 x 22 mm with a slot width of 18 mm (material thickness = 2 mm). We provide components in various materials and surface finishes to