Channel nuts AM 18 are threaded plates used with profile rails A 7, A 8 and A9. The threaded hole is centred by turning the nut 90° after inserting or tipping in the nut. Channel nuts, also known as

JXH M16 have the general Building authority approval Z-21.4-1690. They are used in conjunction with W 38/23 toothed anchor channels and mounting channels and are made of hot-dip galvanised steel or

JXH M12 have the general Building authority approval Z-21.4-1690. They are used in conjunction with W 38/23 toothed anchor channels and mounting channels and are made of hot-dip galvanised steel or

JXD M12 have the general Building authority approval Z-21.4-1690. They are used in conjunction with W 29/20 toothed anchor channels and mounting channels and are made of hot-dip galvanised steel or

JC M10 have European Technical Assessment ETA-09/0338. They are used to fasten companion structures to W 40+, W 40/22, K 40/22 and K 40/25 anchor channels and mounting channels. The bolts have hooked

HS18 tee-head bolts are used to fasten companion structures to the profile rails A7, A8 and A9. Their heads are shaped like hammers and they have a notch at the end of the shaft.. The screws are

The connector KHUV 57 can be used to connect bracket holders KHU 57 to each other. We provide components in various materials and surface finishes to ensure that the corrosion requirements are met

The approved shear connector rod VAB-HB for concrete is used to fasten steel structures. It is permitted to be used as a single attachment in cracked and non-cracked standard concrete with strength ≥

The anchor SAZ-D enables SA anchor bolts to be installed quickly and manually. The manufacturer's specifications must be observed. It is made of galvanised steel and is available in diameters of 8,

The bracket holder KHU 40 can be easily used as a construction profile due to its continuous perforation on three sides. It consists of a U profile 40 x 30 mm (material thickness 2 mm thick). Using