JNA Series 12 nail anchors made of hot-dip galvanised steel and the associated anchor or brick tie channels ensure the permanent and secure connection of wooden components to adjacent reinforced

PENTAFLEX KB® Corner is a preformed single element made of galvanised sheet steel with a special coating for sealing construction joints in corner areas. It is used in combination with PENTAFLEX KB®

PENTAFLEX KB® 80 is a galvanised steel sheet with a special coating for sealing construction joints in walls/slab areas. It is attached to the wall reinforcement using one mounting stirrup per metre.

AM 12 channel nuts are threaded plates used with profile rails B 3 and B 6. The threaded hole is centred by turning the nut 90° after inserting or tipping in the nut. Channel nuts, also known as

TFD-type concrete spacers are round single spacers. These accessories can be attached to horizontal and vertical reinforcements by means of an integrated galvanised eyelet wire. The spacers are made

The channel connector bracket AVAW can be used to connect mounting channels together as crossings or branches. The channel connector brackets consist of a T branch angled to the left, centre or

The BGF 82 head plate is used to attach mounting channels (KHA 82). It is screwed to these and dowelled to the ceiling or floor. It is made of hot-dip galvanised steel. Fastening accessories must be

The beam clamp AVSKA is used to fasten mounting channels (A 41, KHA 41, KHAL 41) with 22 mm slot width to horizontal steel beams. The maximum flange thickness of the steel beam to be fastened is 13

The corner angle BL 5 is used to fasten bracket holders KHA / KHAL and KHU 40/57/60 to walls. The bracket is bolted to the bracket holder and dowelled to the concrete wall. It is made of hot-dip

The AVSK 21 beam clamp is used to attach flat mounting channels (A 7, A 8, KHA 7, KHA 8, KHA 21) with a profile height of 22 mm to horizontal steel beams.The AVSK 41 beam clamp is used to attach