The MKDPOT mounting clamp with pointed stud screw is used for clamping to coated steel beams where potential equalization must be guaranteed. The maximum load is 1.5 kN. The clamping range extends

The SKLT ship cable ladder separating strip allows cables and lines with different functions or voltages to be routed separately in the same ship cable ladder. The divider is bolted to the ladder

The wall bracket KWLL is intended for maximum loads of up to 0.3 kN and is ideal for mesh cable trays and cable trays up to 300 mm wide. The cable tray is fastened with KLR 6x25, the mesh cable tray

The wall bracket KSLW is intended for maximum loads of up to 1.3 kN and is ideal for mesh cable trays and cable trays up to 400 mm wide. It consists of a centrally perforated W/trapezoidal profile 60

The profile rail A 7 is unperforated and consists of a C+ profile 39.5 x 22 mm with a slot width of 18 mm (material thickness = 1.5 mm). We provide components in various materials and surface

The profile rail A 8 is unperforated and consists of a C+ profile 40 x 22 mm with a slot width of 18 mm (material thickness = 2 mm). We provide components in various materials and surface finishes to

The KSL-SP spacer must be installed for wall brackets, bracket holders and ceiling brackets of the W profile system to prevent deformation of the profile due to the preload force of the fastening

The BKD-S floor channel lid hinge connects the BKD-RHP lid to the floor channel. In this way, the lid can be easily opened. The hinge fits the pre-stamped knock-out slugs in the BK and BKD-RHP. The

Cable ladder connector T-joint top LGVTO is used to create a junction for LGG cable ladders with offset heights. The connector is attached to the rail profile of the LGG cable ladder at a 45° angle

WLV 200 wide span connectors can be used to connect 200 mm wide-span cable trays together. One side of the connector is mounted as a floating bearing to allow for thermal expansion. The required