The product solution UKTR is a separating strip for screed-covered duct systems. Depending on the width of the duct, one or two of these construction elements must be fixed to the raw concrete slab

Cables and lines with different functions or voltages can be routed spatially separated from each other in the same floor duct using floor duct separating strip BKRT 110. In addition, the separating

Additional cables that must be routed separately from other cables can be separated within the floor duct system using BKZ Z-profile floor duct. It is mounted on the side wall of the floor duct. It

Cables and lines with different functions or voltages can be routed spatially separated from each other in the same floor duct using floor duct separating strip BKRT 100. In addition, the separating

The RGS 85 perforated cable trays have sides 85 mm high and are available in widths from 100 to 600 mm. The standard length is 3000 mm. We provide components in various materials and surface finishes

The BKDR floor duct cover is placed on top of the floor duct and protects cables and supply lines from flying sparks and other mechanical influences. It is 100 to 600 mm wide corresponding to the

The BKD-RHP floor duct cover is placed on top of the floor duct and protects cables and supply lines from flying sparks and other mechanical influences. It is 100 to 600 mm wide corresponding to the

The installation cable tray separating strip RITR 60, the heavy-duty RIS 60 installation trays and the heavy-duty RDS or RDSR covers allow cables and wires to be laid in a step-resistant system.. In

The cable tray covers RDSR are suitable for all heavy-duty cable trays and protect them from dirt and moisture. They snap into place and interlock on the side rails and also have turning bolts for

The T-joint connector plate is used for cable protection on non-cut T-connections of RG, LGG and WPL/WPR to enable cable-friendly installation. It is used to guide cables over the rail of the cable