The floor duct riser BKS 110 with integrated connectors allows the direction of cable routing to be changed vertically by 90° upwards and downwards. It is 110 mm high and 100 to 600 mm wide. It is

The floor duct telescopic insert BKTE 110 ensures full flexibility during assembly. Its length can be continuously adjusted between 150 and 650 mm allowing two floor ducts to be variably connected

The installation cable tray bend covers RIBDS 90 are suitable for RIB installation cable tray bends 90 and protect them from dirt and moisture. They snap into place and interlock with the side rails.

The variable cable tray bend RBV 85 allows the direction of cable routing to be changed horizontally by 0 to 90° and - mounted as a surface-mounted branch - a change in direction from 0° to 45°. They

UDEP 5PCOM components are installation boards from the underfloor system range. The boards are bolted into data device carriers and are used to accommodate a 5-pin snap-in connector socket or a

UBKM products are bitumen adhesives that are mounting components from the screed-covered underfloor duct product range. Ducts and floor sockets are bonded to the bituminous sheeting using these

USD products are silicone sealants that are mounting components from the screed-covered underfloor duct product range. These sealants are used to tightly close gaps between individual components. For

The sound-insulation joint tape PENTAFLEX® SFB is an elastic PVC joint tape with proven PENTAFLEX® coating in the bonding area of the floor slab. It includes a pre-mounted PENTAFLEX® joint tape

The RAPIDOBAT® unlined is a round formwork tube used to produce reinforced concrete columns with a smooth concrete surface and a faintly visible spiral pattern. The formwork tubes consist of

The RAPIDOBAT® lined is a round formwork tube with a special foil insert. They are used to produce reinforced concrete columns with a very smooth concrete surface of the highest formlining class