UEBD VP E components are square dummy cover units. They consist of a cartridge mounting frame with a dummy insert cartridge and a rubber seal. The cartridges are mounted on levelling units using UKS M4X16E Phillips screws and can be used with max. 3 mounting boxes in floor sockets, assembly covers and raised or false floor openings in wet-cleaned rooms with office traffic loads. The units are made of stainless steel with a flat surface. They have an IP protection class of IP 54 in an unused condition and a max. load capacity of 4.00 kN. They have installation dimensions of 261 x 261 mm and a minimum installation height of 85 mm.
data sheetTender text
You can find the appropriate tender text for this product on these portals:
Floor maintenance: Wet 
Load requirements according to: DIN EN 50085 
Approvals and Certificates
Approvals and Certificates
- VDE/TÜV approval according to DIN EN 50085
- With inspection stamp dia. 13/130 mm: 4/10 kN
Products
Stainless steel, according to ASTM 304 / BS 304 S 3
| Products | H height | Hmin minimum installation height | B width | Pmax maximum load | mounting box maximum number of installable device casings | E fitting dimension | IPn IP protection level in unused condition | T Depth of flooring recess | W Weight per storage unit | incl. show all inclusive accessoires | bookmark |
|---|---|---|---|---|---|---|---|---|---|---|---|
| UEBD 15-VP E | 19 mm | 85 mm | 258 mm | 4,00 kN | 3 | 261 x 261 mm | IP 54 | 0 mm | 3,424 kg |
