The floor duct bend BKVB 110 with integrated connectors allows the direction of cable routing to be changed horizontally by 0 to 90°. It is 110 mm high and 100 to 600 mm wide. It is made of sendzimir hot-dip galvanised steel. To dissipate vertical live loads, one separating strip must be installed in the floor duct for widths ≥ 300 mm and two separating strips for widths ≥ 500 mm. The side connectors must be bent into the required position before assembly. The bend is pushed into the floor ducts and then bolted in place. Provide the remaining outer side rail with edge protection strip (KSB).
data sheetTender text
You can find the appropriate tender text for this product on these portals:
Advantages
Advantages
- Creates horizontal, variable changes of cable routing direction from 0 to 90°
- Cable-friendly guide
Products
steel, continously hot galvanized/Sendzimir process
| Products | H height | B width | t material thickness | W Weight per storage unit | incl. show all inclusive accessoires | bookmark | |
|---|---|---|---|---|---|---|---|
| BKVB 110-10S | 110 mm | 100 mm | 2,00 mm | HORIZONTAL | 1,504 kg | ||
| BKVB 110-15S | 110 mm | 150 mm | 2,00 mm | HORIZONTAL | 1,974 kg | ||
| BKVB 110-20S | 110 mm | 200 mm | 2,00 mm | HORIZONTAL | 2,484 kg | ||
| BKVB 110-30S | 110 mm | 300 mm | 2,00 mm | HORIZONTAL | 3,664 kg | ||
| BKVB 110-40S | 110 mm | 400 mm | 2,00 mm | HORIZONTAL | 5,094 kg | ||
| BKVB 110-50S | 110 mm | 500 mm | 2,00 mm | HORIZONTAL | 6,754 kg | ||
| BKVB 110-60S | 110 mm | 600 mm | 2,00 mm | HORIZONTAL | 8,654 kg |
