The floor duct bend BKVB 100 with integrated connectors allows the direction of cable routing to be changed horizontally by 0 to 90°. It is 100 mm high and 100 to 600 mm wide. It is made of sendzimir hot-dip galvanised steel. To dissipate vertical live loads, one separating strip must be installed in the floor duct for widths ≥ 300 mm and two separating strips for widths ≥ 500 mm. The side connectors must be bent into the required position before assembly. The bend is pushed into the floor ducts and then bolted in place. Provide the remaining outer side rail with edge protection strip (KSB).
data sheetTender text
You can find the appropriate tender text for this product on these portals:
Advantages
Advantages
- Creates horizontal, variable changes of cable routing direction from 0 to 90°
- Cable-friendly guide
Products
steel, continously hot galvanized/Sendzimir process
| Products | H height | B width | t material thickness | W Weight per storage unit | incl. show all inclusive accessoires | bookmark | ||
|---|---|---|---|---|---|---|---|---|
| BKVB 100-10S | 100 mm | 100 mm | 2,00 mm | horizontal | var. | 1,405 kg | ||
| BKVB 100-15S | 100 mm | 150 mm | 2,00 mm | horizontal | var. | 1,865 kg | ||
| BKVB 100-20S | 100 mm | 200 mm | 2,00 mm | horizontal | var. | 2,375 kg | ||
| BKVB 100-30S | 100 mm | 300 mm | 2,00 mm | horizontal | var. | 3,525 kg | ||
| BKVB 100-40S | 100 mm | 400 mm | 2,00 mm | horizontal | var. | 4,945 kg | ||
| BKVB 100-50S | 100 mm | 500 mm | 2,00 mm | horizontal | var. | 6,585 kg | ||
| BKVB 100-60S | 100 mm | 600 mm | 2,00 mm | horizontal | var. | 8,475 kg |
