The floor duct branch BKGL 100 with a mitre cut on the left and integrated connectors allows the direction of cable routing to be changed horizontally in the form of a 45° branch. It is 100 mm high and 100 to 600 mm wide. It is made of sendzimir hot-dip galvanised steel. To dissipate vertical live loads, one separating strip must be installed in the floor duct for widths ≥ 300 mm and two separating strips for widths ≥ 500 mm. The side rail of the main floor duct is cut out accordingly at the point where the connecting floor duct will branch off. The BKGL branch is positioned and bolted in place at this point. The branching floor duct can then be pushed in.
data sheetTender text
You can find the appropriate tender text for this product on these portals:
Advantages
Advantages
- Changes the cable routing direction horizontally in the form of a branch of 45°.
- Cable-friendly guide
Products
steel, continously hot galvanized/Sendzimir process
| Products | H height | B width | t material thickness | W Weight per storage unit | incl. show all inclusive accessoires | bookmark | |
|---|---|---|---|---|---|---|---|
| BKGL 100-10S | 100 mm | 100 mm | 2,00 mm | 45° | 2,782 kg | ||
| BKGL 100-15S | 100 mm | 150 mm | 2,00 mm | 45° | 3,142 kg | ||
| BKGL 100-20S | 100 mm | 200 mm | 2,00 mm | 45° | 3,552 kg | ||
| BKGL 100-30S | 100 mm | 300 mm | 2,00 mm | 45° | 4,382 kg | ||
| BKGL 100-40S | 100 mm | 400 mm | 2,00 mm | 45° | 5,562 kg | ||
| BKGL 100-50S | 100 mm | 500 mm | 2,00 mm | 45° | 6,832 kg | ||
| BKGL 100-60S | 100 mm | 600 mm | 2,00 mm | 45° | 8,182 kg |
