The floor duct bend BKBG 110 with integrated connectors and mitre cut allows the direction of cable routing to be changed horizontally by 90°. It is 110 mm high and 100 to 600 mm wide. It is made of sendzimir hot-dip galvanised steel. To dissipate vertical live loads, one separating strip must be installed in the floor duct for widths ≥ 300 mm and two separating strips for widths ≥ 500 mm. The bend is pushed into the floor ducts and then bolted in place.
data sheetTender text
You can find the appropriate tender text for this product on these portals:
Advantages
Advantages
- Creates horizontal changes of the cable routing direction by 90°.
- Cable-friendly guide
Products
steel, continously hot galvanized/Sendzimir process
| Products | B width | H height | t material thickness | W Weight per storage unit | incl. show all inclusive accessoires | bookmark | ||
|---|---|---|---|---|---|---|---|---|
| BKBG 110-10S | 100 mm | 110 mm | 2,00 mm | horizontal | 90° | 5,054 kg | ||
| BKBG 110-15S | 150 mm | 110 mm | 2,00 mm | horizontal | 90° | 5,794 kg | ||
| BKBG 110-20S | 200 mm | 110 mm | 2,00 mm | horizontal | 90° | 6,614 kg | ||
| BKBG 110-30S | 300 mm | 110 mm | 2,00 mm | horizontal | 90° | 8,494 kg | ||
| BKBG 110-40S | 400 mm | 110 mm | 2,00 mm | horizontal | 90° | 10,714 kg | ||
| BKBG 110-50S | 500 mm | 110 mm | 2,00 mm | horizontal | 90° | 13,274 kg | ||
| BKBG 110-60S | 600 mm | 110 mm | 2,00 mm | horizontal | 90° | 16,014 kg |
