UKD products are dummy covers for open, screed-covered cable duct systems. These components close the duct and protect cables and lines. They are snapped onto the side profiling of the bottom part of

FR spring washers designed according to the former DIN 127 are made of galvanised steel or stainless steel (A4). They provide the optimum preload in bolted joints. Sizes B 6 to B 24 are available.

The anchor channel JXA W 29/20 is approved throughout Europe by ETA-09/0338 and almost worldwide by ICC-ES ESR‐2854. It also has environmental product declaration EPD-JDL-20200260-IBB1-DE. It is made

BKHRSV floor duct side trim is used when the floor duct is elevated by BKHR floor duct brackets and is fastened using a BS 4.2x13 drilling screw. The side trims protect raised floor ducts from

The floor duct bend BKB 100 with integrated connectors allows the direction of cable routing to be changed horizontally by 90°. It is 100 mm high and 100 to 600 mm wide. It is made of sendzimir

The mounting channel JM K 28/28 has environmental product declaration EPD-JDL-20200260-IBB1-DE and is made of hot-dip galvanised steel (fv), stainless steel (A4) or rolled plain steel (wb). It has a

BKV135 100 floor duct connectors can be used to connect floor ducts at an angle of 135°. They are 95 mm high and are made of sendzimir hot-dip galvanised steel.

BKV135 110 floor duct connectors can be used to connect floor ducts at an angle of 135°. They are 95 mm high and are made of sendzimir hot-dip galvanised steel.

Small duct connectors KLKV can be used to connect small ducts together. They are 30 to 60 mm high, 30 to 60 mm wide and 150 mm long and are made of sendzimir hot-dip galvanised steel.

The UBSFMD4 R component is an assembly cover for round parts within the screed-flush duct system UBSF. It is made of hot-dip galvanised sheet steel, has a length of 500 mm and is available in widths