UNE components are square, dummy levelling units consisting of a sheet steel frame, internal level adjusters with levelling bases and earthing clamps. The units are mounted on stainless steel

The perforated profile rail KHA 42 consists of two C+ profiles welded together back to back. It is 42 mm high, 41 mm wide and the slot is 22 mm wide (material = 2.5 mm thick). It is made of hot-dip

The angle bracket BLI is part of the KTSS bracket, but is also used to attach KHI bracket holders to walls. The bracket is bolted to the bracket holder and dowelled to the concrete wall. It is made

The double channel connector bracket AVBD connects two parallel mounting channels (two A 41, KHA 41, KHAL 41 or one KHA 82) with a crossing channel as an intersection. It has fixing holes with Ø 13

The channel support bracket AVBL is used to connect two intersecting mounting channels on one side. It has fixing holes with Ø 13 mm and is made of hot-dip galvanised steel. Fastening accessories

The channel joint connector AVBLA is used to connect two mounting channels (A 41, KHA 41, KHAL 41) in a T-joint. It has fixing holes with Ø 13 mm and is made of hot-dip galvanised steel. Fastening

The left-hand channel joint connector AVE-L is used to connect three mounting channels (A 41, KHA 41, KHAL 41), one continuous channel and two in a T-joint. The two joints are vertical, orientated to

The right-hand channel joint connector AVE-R is used to connect three mounting channels (A 41, KHA 41, KHAL 41), one continuous channel and two in a T-joint. The two joints are vertical, orientated

The internal channel connector AVLI is a versatile accessory, but is primarily used when installing mounting channels (KHA 41, KHAL 41) in the rear position. It has a Ø 13 mm fixing hole and is made

The channel joint connector AVLK is used to connect three mounting channels (A 41, KHA 41, KHAL 41), two continuous channels and one in a T-joint. The T-joint is perpendicular to both continuous