The Clamping Rail has slots every 150 mm and is used to press the clamp joint tape against the existing building. It is available in the types 80 × 8 (16/30, 20/30), 100 × 10 (24/38), in a galvanised

The wall bracket KWW serves as a crossbeam either directly on the building structure and fixed using dowels or on two bracket supports (pendulum suspension). They are made of hot-dip galvanised

The KTW-R 10 cable support tray with riveted back rail is used for routing cables on walls in a space-saving manner. It is available in a width of 118 mm and for cable diameters of 100 mm. It can be

The mesh cable tray outlet plate GKAB supports compliance with required bending radii in the vertical design of cables and lines. It is mounted on the mesh cable tray with two KLU clamping

The mounting channel JXM W 29/20 has environmental product declaration EPD-JDL-20200260-IBB1-DE and is made of hot-dip galvanised steel (fv), stainless steel (A4) or rolled plain steel (wb). It has a

The holding clip KPH is pushed onto the KPR profile and can be freely positioned there. The suspension element is mounted on the retaining claw. The distance between supports must not exceed 6000 mm.

The KPR connector KPV is used to connect two KPR support rails for light fittings. It is pushed into the first channel. The connecting rail is then pushed onto the connector. It is 300 mm long and is

The mounting bracket KPB is used to suspend the light rail system along with a tube with an armoured thread (PG) 9. The bracket is attached to the ceiling using dowels. It is made of hot-dip

The KPR 40 support rail for light fittings is used to suspend linear or strip lights. It is available in lengths of 3000 and 6000 mm, is 40 mm high and 40 mm wide. The rail is made of sendzimir