JSV38 stainless steel (A4) clamp connections create play-free, tension-resistant and compression-resistant connections between two components. The connection is made between a vertical and a

KP-A clamping plates made of hot-dip galvanised steel are used along with the matching bolts to secure crane rails. They are used to securely align the crane rails and hold them in position.

JGM G hammer-head locking plates are threaded plates that are inserted at any point of the corresponding anchor or mounting channel. The threaded hole is centred by turning it 90° after insertion.

JGM H hammer-head locking plates are threaded plates that are inserted at any point of the corresponding anchor or mounting channel. The threaded hole is centred by turning it 90° after insertion.

JGM D hammer-head locking plates are threaded plates that are inserted at any point of the corresponding anchor or mounting channel. The threaded hole is centred by turning it 90° after insertion.

Fibre-Concrete Adhesive is a 2-component epoxy resin adhesive that is created by mixing resin and hardener. This accessory is used to securely bond the formwork spreaders to the fibre-reinforced

Distance Pipes are used to make clamping points for wall formwork and for pipe lead-throughs in concrete parts. Their rough surface ensures that they bond perfectly with the concrete. The plastic

Shear Connector types M12, M16 and M20 are used to bond the anchor rods with the existing building. The clamp joint is fixed to the existing building using this shear connector system.

UEBSEA components are screed anchors which are snapped into the outer profiles of screed-flush cable systems. These articles are used to strengthen the bond between ducts and screed. This counteracts