The anchor channel JXA W 29/20 is approved throughout Europe by ETA-09/0338 and almost worldwide by ICC-ES ESR‐2854. It also has environmental product declaration EPD-JDL-20200260-IBB1-DE. It is made

The anchor channel JXA PC W 64/44 is made of hot-dip galvanised steel (fv) or stainless steel (A4). The material is 5 mm thick and it can be supplied in any desired length up to a maximum of 6 m. It

The mounting channel JM W 55/42 is approved throughout Europe by ETA-15/0386. It also has environmental product declaration EPD-JDL-20200260-IBB1-DE and is made of hot-dip galvanised steel (fv),

The holding clip KPH is pushed onto the KPR profile and can be freely positioned there. The suspension element is mounted on the retaining claw. The distance between supports must not exceed 6000 mm.

The mounting bracket KPB is used to suspend the light rail system along with a tube with an armoured thread (PG) 9. The bracket is attached to the ceiling using dowels. It is made of hot-dip

The JMA brick tie anchor is made of stainless steel for use in the façade area. Hot-dip galvanised products (fv) can be used indoors. The brick tie anchor JMA Series 12 is suitable for the profiles

The cable hooks HK 100 are used for the temporary routing of cables with a diameter of up to 100 mm. The cable hooks are fixed to the wall with a dowel (max. 1 layer; max. 20 kg). They are made of

The cable support tray KTW-A is used for routing cables on walls in a space-saving manner. It is available in widths from 56 to 138 mm and allowing for cable diameters from 40 to 120 mm. It is

The loop channel JSA K 38/17 is made of rolled plain or hot-dip galvanised steel. The delivered length is 5960 ±60 mm. The anchoring stirrups are inserted through the loop openings at intervals of

The loop channel JSA K 28/15 is made of rolled plain or hot-dip galvanised steel. The delivered length is 5960 ±60 mm. The anchoring stirrups are inserted through the loop openings at intervals of