The clamping fastener WLKLT is an accessory part for the WLHS wide-span side rail support if it is used to secure the position of a WL or WLR 200 wide-span tray on steel beams. It is made of hot-dip

The channel connectors AVLW are corner connectors with an angle of 90° with 1-1, 1-2, 1-3 or 2-2 perforations. They connect mounting channels as crossings or branches and are made of hot-dip

UBEBBDL components are a dummy cover set for screed-flush duct systems CHALI. They can bei used for the CHALI floor pan and for door crossings in exchange for hinged cover.These products are made of

The strut bracket KA 30 is attached to bracket holder KDAG 41 or KHA 41/KHAL 41 and is intended for loads up to 0.5 kN. The system is ideal for suspending mesh cable trays and cable trays up to 400

The screed-flush duct system UBSF is used for horizontal cable routing and is a free-standing, open system with removable covers. It is made of hot-dip galvanised sheet steel and consists of

The angle bracket BLI is part of the KTSS bracket, but is also used to attach KHI bracket holders to walls. The bracket is bolted to the bracket holder and dowelled to the concrete wall. It is made

The BKVBDR-RHP variable floor duct cover is placed on top of the floor duct bend BKVB and protects cables and supply lines from flying sparks and other mechanical influences. It is 100 to 600 mm

The anchor channel JTA W 55/42 is approved throughout Europe by ETA-09/0338 and almost worldwide by ICC-ES ESR‐2854. It also has environmental product declaration EPD-JDL-20200260-IBB1-DE. It is made

The anchor channel JTA W 53/34 is approved throughout Europe by ETA-09/0338 and almost worldwide by ICC-ES ESR‐2854. It also has environmental product declaration EPD-JDL-20200260-IBB1-DE. It is made

The internal central suspension MA 60 is used for suspending cable trays up to 300 mm wide from ceilings. It is designed for loads up to 0.3 kN and is made of stainless steel (V4A) or sendzimir