The lightweight clamping claw SKLL is used to fasten cable trays and wide-span cable trays to steel beams. For the latter, wide-span side rail supports (WPHS) must also be used. The clamping range

The washer RUS 50 is a versatile accessory, but is mainly used for channel-bolt connections, especially for I profiles 80x42 (KHI). It is suitable for threads M6, M8, M10 and M12. We provide

UEBSD components are dummy covers for use with screed-flush duct systems. The products are made of sendzimir hot-dip galvanised sheet steel in accordance with DIN EN 10346. They are firmly bolted to

The long clamp fastening set KLRL, consisting of FRSV 6x16 and SEMS 6, is used to fasten our cable trays to substructures or superstructures that cannot be fastened using the KLR. The included longer

The channel connectors AVLW are corner connectors with an angle of 90° with 1-1, 1-2, 1-3 or 2-2 perforations. They connect mounting channels as crossings or branches and are made of hot-dip

The anchor clamp SRS-A and 70 mm profile rail attached to it can be used, for example, to attached signs to the protective tube. The anchor clamp is available with diameters of 30 or 60 mm. We

The wire suspension DSAHFFR 5 with loop and universal closure is used to suspend cable trays and mesh cable trays from the ceiling. It is made of galvanised steel and is available in lengths from

The PENTAFLEX® Floor Drain PP is designed for use with watertight reinforced concrete slabs and consists of a PP pipe and a slotted grate made of stainless steel or ABS plastic. It can be walked on

The HF cable clamps HF-EL 1-4 can be used to route fibre-optic/high-frequency cables with a maximum diameter of 100 mm. They are suitable for mounting directly on the wall and are made of galvanised

PLURAFLEX® C11 Active is a PVC-based injection hose with rubber swelling used to seal construction joints. PU resins and PU foams can be used as injection media. The filling quantity per metre is