UDKS3 components are universal claws for plastic installation units. These claws are used to create robust connections between the installation units and the assembly covers, floor sockets or raised

KLKR small ducts with covers and turning bolts are available made from sendzimir hot-dip galvanised steel with sides 30 to 60 mm high and 50 to 60 mm wide. They are 3000 mm long.

The corner attachment EBW is intended for maximum loads of up to 6.50 kN. It is dowelled to concrete columns and is used to attach wide-span formed parts such as bends that allow a horizontal change

UKS components are Phillips screws. Various components from the underfloor system range can be securely connected to each other using these accessories. Suitable screwdrivers centre themselves

HK 30-70 cable hooks are used for the temporary routing of cables with a diameter of up to 70 mm. The cable hooks are attached directly to the wall and can be mounted in max. 3 tiers on top of each

The variable cable tray bend RBV 85 allows the direction of cable routing to be changed horizontally by 0 to 90° and - mounted as a surface-mounted branch - a change in direction from 0° to 45°. They

The rungs STLS can be installed during the installation of the vertical ladder and bolted to the side rail. They are suitable for STU 50 vertical ladders and are 203 to 793 mm wide corresponding to

The profile rail A 2 is unperforated and consists of a C+ profile 50 x 31 mm with a slot width of 22 mm (material thickness = 3.25 mm). We provide components in various materials and surface finishes

UAA B components from the underfloor systems range are one-piece dummy covers. The square covers are used to cover empty spaces in UA cover plates as long as they are not equipped with the

SA 2 protective caps are suitable for channels KHAL 41, KHA 42, KHA 41, A 41 and are used to cover the profile ends. They are cadmium yellow to indicate possible joints and made of polyethylene.